Skip to content
Orbit 8K
Low throttling riskNew Zealand

Stop IPTV Buffering on One NZ

One NZ customers in New Zealand often see unexplained buffering in the evening or a block page on streaming hosts. The cause is traffic shaping or DNS filtering, and the fix takes about five minutes.

Typical symptoms on One NZ

  • Ultra Hub band steering
  • Wireless broadband deprioritisation after 7pm
  • Default DNS slowness to US edges

Recommended DNS servers

Replace the default One NZ resolver on your router or streaming device:

Primary DNS: 1.1.1.1
Secondary DNS: 9.9.9.9

Recommended streaming port

Our servers answer on an encrypted TLS port that deep packet inspection cannot classify as video:

Use port 8080 (https server address from your welcome message)

Fix One NZ buffering in 3 steps

  1. 1

    Set DNS on the Ultra Hub

    Log in at 192.168.1.1 > Advanced > DHCP and set DNS to 1.1.1.1 / 9.9.9.9; split the 2.4 and 5 GHz networks.

  2. 2

    Use the 8443 address

    Edit the playlist in your player and use the https server URL on port 8443.

  3. 3

    Wire the main TV and raise the buffer

    Connect the Fire TV, Apple TV or Smart TV by Ethernet (or a USB-C Ethernet adapter) and set the player buffer to 2–3 seconds. Most remaining stutter is Wi-Fi, not the ISP.

One NZ questions

Does One NZ block IPTV?

One NZ does not block IPTV as such, but its security filters and evening traffic shaping can slow unencrypted video. The three steps on this page remove both.

Do I need a VPN?

No. The encrypted 8443 route and a DNS change do the job without adding VPN latency.

Which DNS should I use on One NZ?

1.1.1.1 as primary and 9.9.9.9 as secondary, set on the streaming device itself where the router locks DNS.

Test a buffer-free stream on One NZ

Request the free 24-hour trial and see OrbitLock Anti-Freeze 9.2 hold a 4K match through the evening peak.