Stop IPTV Buffering on Contact Energy Broadband
Contact Energy Broadband customers in New Zealand often see unexplained buffering in the evening or a block page on streaming hosts. The cause is traffic shaping or DNS filtering, and the fix takes about five minutes.
Typical symptoms on Contact Energy Broadband
- Supplied router band steering
- Default resolver slowness
- Occasional international latency
Recommended DNS servers
Replace the default Contact Energy Broadband resolver on your router or streaming device:
Recommended streaming port
Our servers answer on an encrypted TLS port that deep packet inspection cannot classify as video:
Use port 8080 (https server address from your welcome message)
Fix Contact Energy Broadband buffering in 3 steps
- 1
Set DNS and split Wi-Fi bands
On the Contact router set DNS to 1.1.1.1 / 9.9.9.9 and give the 5 GHz network its own name.
- 2
Use the 8443 address
Edit the playlist in your player and use the https server URL on port 8443.
- 3
Wire the main TV and raise the buffer
Connect the Fire TV, Apple TV or Smart TV by Ethernet (or a USB-C Ethernet adapter) and set the player buffer to 2–3 seconds. Most remaining stutter is Wi-Fi, not the ISP.
Contact Energy Broadband questions
Does Contact Energy Broadband block IPTV?
Do I need a VPN?
Which DNS should I use on Contact Energy Broadband?

Test a buffer-free stream on Contact Energy Broadband
Request the free 24-hour trial and see OrbitLock Anti-Freeze 9.2 hold a 4K match through the evening peak.

