Skip to content
Moderate throttling riskAustralia

Stop IPTV Buffering on TPG

TPG customers in Australia often see unexplained buffering in the evening or a block page on streaming hosts. The cause is traffic shaping or DNS filtering, and the fix takes about five minutes.

Typical symptoms on TPG

  • Peak-hour congestion on lower NBN tiers
  • Supplied Archer router Wi-Fi limits
  • CGNAT on some fibre plans

Recommended DNS servers

Replace the default TPG resolver on your router or streaming device:

Primary DNS: 1.1.1.1
Secondary DNS: 9.9.9.9

Recommended streaming port

Our servers answer on an encrypted TLS port that deep packet inspection cannot classify as video:

Use port 8443 (https server address from your welcome message)

Fix TPG buffering in 3 steps

  1. 1

    Set DNS on the router

    Log in to the TPG router (192.168.1.1) > Network > DHCP and set DNS to 1.1.1.1 / 9.9.9.9.

  2. 2

    Switch the player to the port 8443 address

    In TiviMate, IBO Player or Smarters edit the playlist and replace the server URL with the https address on port 8443 from your welcome message. The stream is then TLS-encrypted and indistinguishable from ordinary web traffic.

  3. 3

    Wire the main TV and raise the buffer

    Connect the Fire TV, Apple TV or Smart TV by Ethernet (or a USB-C Ethernet adapter) and set the player buffer to 2–3 seconds. Most remaining stutter is Wi-Fi, not the ISP.

TPG questions

Does TPG block IPTV?

TPG does not block IPTV as such, but its security filters and evening traffic shaping can slow unencrypted video. The three steps on this page remove both.

Do I need a VPN?

No. The encrypted 8443 route and a DNS change do the job without adding VPN latency.

Which DNS should I use on TPG?

1.1.1.1 as primary and 9.9.9.9 as secondary, set on the streaming device itself where the router locks DNS.

Test a buffer-free stream on TPG

Request the free 24-hour trial and see OrbitLock Anti-Freeze 9.2 hold a 4K match through the evening peak.