Skip to content
Low throttling riskAustralia

Stop IPTV Buffering on iiNet

iiNet customers in Australia often see unexplained buffering in the evening or a block page on streaming hosts. The cause is traffic shaping or DNS filtering, and the fix takes about five minutes.

Typical symptoms on iiNet

  • Older TG-789 modems struggling with 4K Wi-Fi
  • Evening congestion on HFC in Perth
  • Default DNS slowness

Recommended DNS servers

Replace the default iiNet resolver on your router or streaming device:

Primary DNS: 1.1.1.1
Secondary DNS: 8.8.8.8

Recommended streaming port

Our servers answer on an encrypted TLS port that deep packet inspection cannot classify as video:

Use port 8080 (https server address from your welcome message)

Fix iiNet buffering in 3 steps

  1. 1

    Change DNS on the modem

    Log in to the iiNet modem (10.1.1.1) > Advanced > DHCP and set DNS to 1.1.1.1 / 8.8.8.8.

  2. 2

    Use the 8443 address

    Edit the playlist in your player and use the https server URL on port 8443.

  3. 3

    Wire the main TV and raise the buffer

    Connect the Fire TV, Apple TV or Smart TV by Ethernet (or a USB-C Ethernet adapter) and set the player buffer to 2–3 seconds. Most remaining stutter is Wi-Fi, not the ISP.

iiNet questions

Does iiNet block IPTV?

iiNet does not block IPTV as such, but its security filters and evening traffic shaping can slow unencrypted video. The three steps on this page remove both.

Do I need a VPN?

No. The encrypted 8443 route and a DNS change do the job without adding VPN latency.

Which DNS should I use on iiNet?

1.1.1.1 as primary and 8.8.8.8 as secondary, set on the streaming device itself where the router locks DNS.

Test a buffer-free stream on iiNet

Request the free 24-hour trial and see OrbitLock Anti-Freeze 9.2 hold a 4K match through the evening peak.